If you do a lot of night driving, however, you may want to look elsewhere. But the Beam is worth buying just for the simplicity on offer and clear, crisp daytime video. Multiple users can connect to the camera, so a passenger can view and share live footage if needed, too.Īs a relatively new brand in the UK, Nexar still has a way to go forming insurance partnerships and connecting to additional services. Fit, forget and then if there’s an incident you need to save, just pop the memory card out and check the HD footage directly. Setup and installation is easy and you can use it without all the app features. ![]() I particularly liked how easy it was to hide it behind a mirror and have an uncluttered dashboard, plus the trouble-free operation of the parking mode (even if all it captured was me opening or closing doors, it did so reliably). It doesn’t attempt to do too much with the software, which leaves you wondering what potential there is for future models (Nexar are developing a 4G connected camera, where the cloud storage and parking mode would be more effective, but it won’t be as affordable). The Nexar Beam is a great little camera for drivers who want a no-nonsense record, but with easy access from a smartphone. Unlike some Wi-Fi enabled cameras it doesn’t seem to be possible to connect it to an in-car hotspot, so it’s easier to think of the Beam as an extension of your smartphone and work with it that way. ![]() With the included 32GB card it stores 4.5 hours of footage in a continuous roll of clips it’s possible to download a Full HD clip from the camera with the Nexar app and then share/save/report it. Discover worry-free driving todayNexar Beam GPS dash cam records at Full HD 1080P resolution, backs up important videos to the cloud, and provides. The camera is a 2.0-megapixel unit that records in Full HD, but uploads to the Nexar cloud storage in 720p when you’re driving and have the app connected. You can leave your windscreen mount in place and hardwire to the car and still remove the camera without disturbing the positioning. This switch ends up nearer the passenger in right hand drive cars, so if it had other features it would be a little irritating to use.Ĭonnection to the mount is ‘dumb’ in that it’s just a plastic click, but there’s a flying cable to plug in. The interface is limited to just two LEDs on the rear for power and Wi-Fi connection, and a power switch on the side. Make sure that the crimp is tight and the wire is held in tightly.The Beam is a compact camera that measures less than a couple of inches square, and has no distracting display on the back. Because of this, they may wiggle loose in the add-a-fuse leading to an inconsistent current. Loose Wire in Add-A-Fuse - On some hardwire kits, the wire is much thinner than the socket on the add-a-fuse. ![]() If this happens, please contact us for a replacement. There might also be inline glass fuses on the cigarette cable or hardwire kit that can also be blown. Blown Fuse: If the fuse on the add-a-fuse is blown, the kit will not receive power.Add-A-Fuse Incorrectly Set Up: If you don't put a fuse into the top fuse slot of the add-a-fuse, it will not feed power to the hardwire kit.A loose or weak ground may result in restarting when the vehicle hits a bump. Bad Ground: When an incorrect ground is used the camera won't get power.Please double check with your specific hardwire kit for the wire orientation and don't go off other guides. Reversed orientation of the accessory and ignition switched wires: The dash cam will behave abnormally if the wires are switched and in some cases even result in battery drain.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |